|
606F Cap for Flat Blade / 606F Cross for Flat Blade |
|
|
Designed to eliminate vandalism and provide dependable
service in areas with severe wind conditions.
Available to fit 2.5" standard pipe, also up to 3"
O.D.
tubing. Matching crosspieces available in 90°
and 45° |
|
606UCF Cap for Flat Blade /
606F Cross for Flat Blade |
|
 |
Die cast of special aluminum #385 under 400 tons of
pressure, these brackets have tensile strength of 49,000
P.S.I. Designed to fit the "U" channel type sign
post. Matching crosspieces available in 90°
and 45° |
|
808F Cap for Flat Blade / 808F
Cross for Flat Blade |
|
 |
This "expressway" type cap provides the ultimate in
vandal resistance. Extra heavy 5/16" bottom slot
web prevents buckling; 5/16" slot wall provides positive
holding power for your largest signs. Post caps
are available to fit 2 3/8" O.D. tubing. Cross die
cast under 700 tons pressure. Crosspieces
available in 90° and
45° |
|
808EX Cap for Extruded Blade /
808EX Cross for Extruded Blade |
|
 |
This "expressway" type cap provides the ultimate in
vandal resistance. Extra heavy 5/16" bottom slot
web prevents buckling; 5/16" slot wall provides positive
holding power for your largest extruded signs.
Post caps are available to fit 2 3/8" O.D. tubing.
Cross die cast under 700 tons pressure. Accurately
machined to fit standard extruded blade sections with
reflective tape. Crosspieces available in 90°
and 45° |
|
850F Cap for Flat Blade / 850F
Cross for Flat Blade |
|
 |
Heavy wall sections through-out. Cap attaches
securely to post by means of four self-locking set
screws. Blade slots machined for precise fit of
standard blade sections and to insure vertical
alignment. Post caps are available to fit 1.5",
1.75" and 2" square post. Cross designed with
heavy wall thickness and gussets on each side for extra
support. Crosspieces available in 90°
and 45° |
|
850EX Cap for Extruded Blade /
850EX Cross for Extruded Blade |
|
 |
Heavy wall sections through-out. Cap attaches
securely to post by means of four self-locking set
screws. Blade slots machined for precise fit of
extruded blade sections and to insure vertical
alignment. Post caps are available to fit 1.5",
1.75" and 2" square post. Cross designed with
heavy wall thickness and gussets on each side for extra
support. Crosspieces available in 90°
and 45° |
|
Pyramid Cap |
|
 |
Aluminum ornamental pyramid cap to fit 2" galvanized
square post. |
|
809 Flat or Extruded - 6" Slot
for 2" Round or U-Channel |
|
 |
Custom drilling to your specifications for Bolt Thru or
Set Screw Fasteners. Die cast aluminum 6" slot
lengths for superior sign holding strength. Slot
widths to fit both extruded and flat blade signs.
Vandal proof or standard set screws are available with
same side or opposite side access directions. |
|
Style #812 |
|
 |
|
